A new method for improving the inductively coupled data transmission rate of mooring buoy based on carrier signal frequency selection

Nanotechnology and Precision Engineering

Shaobo Yang¹  Hongyu Li²  Rong Du²  Xingfei Li² 

[1] Corresponding author.;State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China;

关键词: Mooring buoy;    Inherent characteristics;    Inductively coupled data transmission rate;    Carrier signal frequency;    Data transmission performance;    Amplitude-frequency characteristic;   

DOI  :  

来源: DOAJ

【 摘 要 】

In the inductively coupled data transmission system of the mooring buoy, the carrier signal frequency of the transmission channel is limited due to the inherent characteristics of the system, resulting in limited channel bandwidth. The limited channel bandwidth limits the increase in inductively coupled data transmission rate. In order to improve the inductively coupled data transmission rate of mooring buoy as much as possible without damaging the data transmission performance, a new method was proposed in this paper. The method is proposed to improve the data transmission rate by selecting the appropriate carrier signal frequencies based on the principle of maximizing the amplitude value of amplitude-frequency characteristic curve of the system. Research has been done according to this method as follows. Firstly, according to the inductively coupled transmission mooring buoy structure, the inductively coupled data transmission circuit model was established. The binary frequency shift keying (2FSK) digital signal modulation mode was selected. Through theoretical analysis, the relation between the carrier signal frequency and the data transmission performance, the relation between the carrier signal frequency and the 2FSK signal bandwidth were obtained. Secondly, the performance and the bandwidth of the signal transmission were studied for the inherent characteristics of the actual inductively coupled data transmission system. The amplitude-frequency characteristic of the system was analyzed by experiments. By selecting the appropriate carrier signal frequency parameters, an excellent data transmission performance was guaranteed and a large 2FSK signal bandwidth was obtained. Finally, an inductively coupled data transmission rate optimization experiment and a bit error rate analysis experiment were designed and carried out. The results show that the high-speed and reliable data transmission of the system was realized and the rate can reach 100 kbps.

【 授权许可】

Unknown