Hydrothermal synthesis of LaFeO3 nanoparticles adsorbent: Characterization and application of error functions for adsorption of fluoride

MethodsX

Mostafa Sharifi¹  Soudabeh Hamedshahraki²  Chinenye Adaobi Igwegbe³  Shahin Ahmadi³  Mohammad Mesbah⁴ 

[1] Corresponding authors.;Department of Biostatistic, Zabol University of Medical Sciences, Zabol, Iran;Department of Environmental Health, Zabol University of Medical Sciences, Zabol, Iran;Young Researchers and Elite Club, Science and Research Branch, Islamic Azad University, Tehran, Iran;

关键词: Fluoride;    Lanthanum ferrite nanoparticles;    Langmuir;    Adsorption;    Isotherm;   

DOI  :  

来源: DOAJ

【 摘 要 】

The adsorption of fluoride from aqueous solution by lanthanum ferrite nanoparticles (LaFeO3 NPs) synthesized by the hydrothermal method has been investigated. This experimental study was conducted on a laboratory scale. The effects of various operating parameters such as pH (3–11), LaFeO3 NPs dosage (0.1–1.0 g/L), contact time (15–120 min), temperature (303–318 K), and initial concentration of fluoride (15–40 mg/L) on fluoride adsorption were studied. The results showed that under optimal conditions of fluoride concentration of 20 mg/L, pH of 5, LaFeO3 NPs dosage of 0.9 g/L, temperature of 308 K, and contact time of 60 min, maximum percentage removal of 94.75 % was obtained. The process of fluoride adsorption on LaFeO3 NPs was found to depend on the Freundlich adsorption and Koble–Corrigan isotherm models. The monolayer adsorption capacity of LaFeO3 NPs was 2.575 mg/g. The kinetic data fitted best into the pseudo-second-order model considering the values of the regression coefficients (r2) and error functions used. The thermodynamics study indicated that the adsorption process was exothermic (ΔH°< 0) and spontaneous (ΔG°< 0) in nature. It could be concluded that the synthesized LaFeO3NPs can be used as an effective adsorbent for fluoride ions removal from aqueous solutions.

【 授权许可】

Unknown