On the Effect of Pouring Temperature on Spheroidal Graphite Cast Iron Solidification

Metals

Diego Celentano¹  Marcela Cruchaga²  Bernd Schulz³  Alex Escobar³ 

[1] Departamento de Ingeniería Mecánica y Metalúrgica, Centro de Investigación en Nanotecnología y Materiales Avanzados (CIEN-UC), Pontificia Universidad Católica de Chile (PUC),Av. Vicuña Mackenna 4860, Santiago, Chile;Departamento de Ingeniería Mecánica, Universidad de Santiago de Chile (USACH),Av. Bernardo O'Higgins 3363, Santiago, Chile;Departamento de Ingeniería Metalúrgica, Universidad de Santiago de Chile (USACH),Av. Bernardo O'Higgins 3363, Santiago, Chile;

关键词: spheroidal graphite cast iron;    solidification;    microstructure;    pouring temperature;   

DOI  :  10.3390/met5020628

来源: DOAJ

【 摘 要 】

This work is focused on the effect of pouring temperature on thethermal-microstructural response of an eutectic spheroidal graphite cast iron (SGCI). To this end, experiments as well as numerical simulations were carried out. Solidification tests in a wedge-like part were cast at two different pouring temperatures. Five specific locations exhibiting distinct cooling rates along the sample were chosen for temperature measurements and metallographic analysis to obtain the number and size of graphite nodules at the end of the process. The numerical simulations were performed using a multinodular-based model. Reasonably good numerical-experimental agreements were obtained for both the cooling curves and the graphite nodule counts.

【 授权许可】

Unknown