Characteristics of Surface Acoustic Wave Sensors with Nanoparticles Embedded in Polymer Sensitive Layers for VOC Detection

Sensors

Cristian Viespe¹  Dana Miu¹ 

[1] Laser Department, Plasma and Radiation Physics, National Institute for Laser, Atomistilor409, 077125 Bucharest-Magurele, Romania;

关键词: SAW sensor;    polymer nanocomposite;    nanoparticle;    VOC detection;    pulsed laser ablation;   

DOI  :  10.3390/s18072401

来源: DOAJ

【 摘 要 】

Surface Acoustic Wave (SAW) sensors with several types of polymer sensing films, containing embedded Fe3O4 nanoparticles (NPs) with various dimensions and concentrations, were studied. A sensor with a sensing film consisting of the polymer alone was used for comparison. NPs with a mean diameter of 7 nm were produced by laser ablation with 5 ns pulse durations, and NPs with 13 nm diameters were obtained with a laser having 10 ps pulse durations. The properties of the Surface Acoustic Wave sensors with such sensing films were analyzed. Their response (frequency shift, sensitivity, noise and response time) to three different volatile organic components (VOCs) at various concentrations were compared with one another. The frequency shift and sensitivity increased with increasing NP concentration in the polymer for a given NP dimension and with decreasing NP diameter for a given concentration. The best results were obtained for the smallest NPs used. The SAW sensor containing 7 nm NPs had a limit of detection (LOD) of 65 ppm (almost five times better than the sensor with polymer alone), and a response time of about 9 s for ethanol.

【 授权许可】

Unknown