Sensors | |
The Application of Microelectromechanical Systems (MEMS) Accelerometers to the Assessment of Blast Threat to Armored Vehicle Crew | |
Paweł Szmidt1  Edyta Krzystała2  Arkadiusz Mężyk2  Sławomir Kciuk2  | |
[1] DUAL-PROJEKT Szmidt Paweł, 44-141 Gliwice, Poland;Department of Theoretical and Applied Mechanics, Faculty of Mechanical Engineering, Silesian University of Technology, 44-100 Gliwice, Poland; | |
关键词: blast load; mine-resistant vehicle; MEMS accelerometers; impulse measurement; measurement system; | |
DOI : 10.3390/s22010316 | |
来源: DOAJ |
【 摘 要 】
This paper describes the development and application of an autonomous register and measurement system (ARMS), and the application of microelectromechanical systems (MEMS) accelerometers to the assessment of blast threat to armored vehicle crews. Taking measurements with reference to an explosion is one of the principal issues in the protection of crews of special vehicles. The proposed ARMS reduces research costs and contributes to the development of an autonomous, wireless test stand, applicable in various research areas and industry. The ARMS performs data acquisition with simultaneous measurement in multiple channels. The maximum sampling rate is 100 kHz and the sensor range is ±500 g. This solution is an alternative to cable systems, which have a high energy demand. The functionality of the developed autonomous measuring system is demonstrated experimentally. The paper concludes with a field study of the proposed system and the application of MEMS accelerometers via a mine blast test of a military vehicle at level 4 of STANAG 4569.
【 授权许可】
Unknown