Numerical Solution of Axisymmetric Inverse Heat Conduction Problem by the Trefftz Method

Energies

Sylwia Hożejowska¹  Magdalena Piasecka² 

[1] Faculty of Management and Computer Modelling, Kielce University of Technology, 25-314 Kielce, Poland;Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, 25-314 Kielce, Poland;

关键词: annular minigap;    flow boiling;    heat transfer coefficient;    inverse problem;    trefftz method;   

DOI  :  10.3390/en13030705

来源: DOAJ

【 摘 要 】

In this paper, the issue of flow boiling heat transfer in an annular minigap was discussed. The main aim of the paper was determining the boiling heat transfer coefficient at the HFE-649 fluid−heater contact during flow along an annular minigap. The essential element of the experimental stand was a test section vertically oriented with the minigap 2 mm wide. Thermocouples were used to measure the temperature of the heater and fluid at the inlet and the outlet to the minigap. The mathematical model assumed that the fluid flow was laminar and the steady−state heat transfer process was axisymmetric. The temperatures of the heated surface and of the flowing fluid were assumed to fulfill energy equations with adequate boundary conditions. The problem was solved by the Trefftz method. The local heat transfer coefficients at the fluid−test surface interface were calculated due to the third kind boundary condition at the saturated boiling. Graphs were used to illustrate: the measurement of the heater surface temperature, 2D temperature distributions in the pipe and fluid, and the heat transfer coefficient as a function of the distance from the minigap inlet. The measurement uncertainties and accuracy of the heat transfer coefficient determination were estimated.

【 授权许可】

Unknown