Fully Metallic Flat Lens Based on Locally Twist-Symmetric Array of Complementary Split-Ring Resonators

Symmetry

Oscar Quevedo-Teruel¹  Oskar Dahlberg¹  Guido Valerio² 

[1] Division of Electromagnetic Engineering, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden;Laboratoire d’Électronique et Électromagnétisme, Sorbonne Université, F-75005 Paris, France;

关键词: twist symmetry;    lens antenna;    complementary split-ring resonator;    complementary split ring resonator (CSRR);   

DOI  :  10.3390/sym11040581

来源: DOAJ

【 摘 要 】

In this article, we demonstrate how twist symmetries can be employed in the design of flat lenses. A lens design is proposed, consisting of 13 perforated metallic sheets separated by an air gap. The perforation in the metal is a two-dimensional array of complementary split-ring resonators. In this specific design, the twist symmetry is local, as it is only applied to the unit cell of the array. Moreover, the twist symmetry is an approximation, as it is only applied to part of the unit cell. First, we demonstrate that, by varying the order of twist symmetry, the phase delay experienced by a wave propagating through the array can be accurately controlled. Secondly, a lens is designed by tailoring the unit cells throughout the aperture of the lens in order to obtain the desired phase delay. Simulation and measurement results demonstrate that the lens successfully transforms a spherical wave emanating from the focal point into a plane wave at the opposite side of the lens. The demonstrated concepts find application in future wireless communication networks where fully-metallic directive antennas are desired.

【 授权许可】

Unknown