MATERIAL CHOICE AND BLANKS OPERATION TECHNOLOGY OF AK6 ALUMINIUM ALLOY

Nauka ta progres transportu

S. I. Mamchur¹  M. V. Hrekova¹  N. YE. Kalinina¹  T. K. Lopatkina¹  K. O. Musina² 

[1] Dep. «Production Technologies», Oles Honchar Dnipropetrovsk National University, Gagarin Av., 72, Dnipropetrovsk, Ukraine, 49050, [phone], Ukraine;Dep. «Production Technologies», Oles Honchar Dnipropetrovsk National University, Gagarin Av., 72, Dnipropetrovsk, Ukraine, 49050, tel. [phone], e-mail [e-mail], ORCID 0000-0002-7671-0637, Ukraine;

关键词: blnks;    aluminum alloy;    technological processes;    thermal processing;    microstructure;    mechanical properties;   

DOI  :  

来源: DOAJ

【 摘 要 】

Purpose. Justification of the material and heat treatment method of aluminum alloy for the manufacturing of parts, type «plate» based on the results of microstructure and mechanical properties research; development of technological process of blanks operation of AK6 aluminum alloy. Methodology. Powdered alloy based on aluminum type AK6 was the research material. Finished forgings with the size 2520×1520×65 mm were obtained as a result of the preparation and forging of the blanks. After mechanical treatment of the blanks they were exposed to thermal processing and milling. Structure of the metal was examined under light microscope MIM-8M. Brinell hardness was used as the strength alloy characteristic. Findings. Influence analysis of alloy elements on the structure of deformable aluminum alloys was carried out. Research of influence of heat treatment modes on structure and properties of the AK6 alloy were performed. The improved technological process, which made it possible to obtain the item with the improved structure and properties and lower costs is offered. Originality. The samples of AK6 powdered alloy on fire resistance were tested. It is established that under heating of an example in the oxidative flame, it does not ignite to a temperature of 705 °C. The cause of high fire resistance of AK6 alloy samples was found, it is connected with the presence in the material the evenly distributed, small oxide inclusions and amorphous oxide film on the surface. Practical value. Hard conditions of work (corrosion in marine and industrial atmosphere, static and shock loads, cyclic temperature) allow the use of the item in various designs.

【 授权许可】

Unknown