Characterization and Application of Mangosteen Peel Activated Carbon for Ammonia Gas Removal

Environment and Natural Resources Journal

Puji Lestari¹  Zarah Arwieny Hanami¹ 

[1] Faculty of Civil and Environmental Engineering, Bandung Institute of Technology, Bandung 40132, Indonesia;

关键词: activated carbon;    adsorption;    ammonia;    mangosteen peel;   

DOI  :  10.32526/ennrj/19/2020298

来源: DOAJ

【 摘 要 】

Mangosteen peel can be used as an activated carbon precursor because of its high lignin content and hardness. In this study, mangosteen peel activated carbon (MP-AC) was prepared by a physical activation method using CO2 at 850°C. The Brunauer-Emmett-Teller (BET) analysis was used to assess the optimal activation time to identify the largest surface area. The properties of MP-AC were characterized by the SEM-EDS and FTIR analyses. The results showed that MP-AC obtained from the 120-minute activation time had the largest BET specific surface area of 588.41 m2/g and was selected as an adsorbent in the dynamic adsorption of ammonia gas. The values of moisture content, ash content, and iodine number of MP-AC were 6.07%, 9.8%, and 1153.69 mg/g, respectively. Breakthrough curve indicated that with lower inlet concentration and higher adsorbent mass, longer breakthrough time is reached. Equilibrium data was best fitted to the Langmuir isotherm, while the pseudo-first order kinetic model favorably described the adsorption kinetics. The results revealed a potential to utilize MP-AC as an adsorbent for ammonia gas removal with average NH3 adsorption capacity of 0.41 mg/g.

【 授权许可】

Unknown