High-performance blow spun waste-acrylonitrile butadiene styrene (ABS) fibrous membrane for air filter

Journal of Materials Research and Technology

Aji Insan Kamil¹  Muhammad Miftahul Munir²  Muzakki Burhanuddin³ 

[1] Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia;Corresponding author.;Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia;

关键词: Acrylonitrile butadiene styrene (ABS);    Air filter;    Blow spinning;    Membrane;    Polymer waste;   

DOI  :  

来源: DOAJ

【 摘 要 】

The plastic wastes treatment needs more attention since conventional waste handlings could create other environmental issues. Plastic waste recycling into a higher-value product, such as fiber membrane, could be one solution. On the other hand, the fabrication of high-performance air filters from abundant materials is also needed to overcome the increasing health risk from air pollution. Here, we demonstrate an upgraded blow spinning technique for fabricating air filters from waste-acrylonitrile butadiene styrene (waste-ABS). A comprehensive discussion on the optimum fabrication process, performance, and characteristics of the waste-ABS air filter was presented. Furthermore, the blow spinning technique produces fibrous surfaces that enhance the raw ABS's property into a more hydrophobic membrane. The ABS membrane exhibited high filtration efficiency of 96.17%, with an acceptable pressure drop of 86.6 Pa and a decent quality factor of 3.76 ( × 10−2 Pa−1). These results were comparable to or even better than fiber membranes made from other materials. Finally, the fabricated waste-ABS air filter presents a promising application for faster high-performance air filter production.

【 授权许可】

Unknown