Effects Of The Combined Heat And Cryogenic Treatment On The Stability Of Austenite In A High Co-Ni Steel

Archives of Metallurgy and Materials

Hausbauer M.¹  Ploberger S.¹  Ressel G.²  Ebner R.²  Gruber M.²  Marsoner S.²  Wiessner M.² 

[1] BÖHLER EDELSTAHL GMBH ;MATERIALS CENTER LEOBEN FORSCHUNG GMBH, ROSEGGERSTRASSE 12, LEOBEN, A-8700 AUSTRIA;

关键词: high Co-Ni steel;    reverted austenite;    retained austenite;    high temperature X-ray diffraction;    dilatometer investigations;    stal Co-Ni;    austenite przemieniony;    austenite szczątkowy;    rentgenowska dyfraktometria wysokotemperaturowa;    dylatometria;   

DOI  :  10.1515/amm-2015-0358

来源: DOAJ

【 摘 要 】

The stability of austenite is one of the most dominant factors affecting the toughness properties of high Co-Ni steels such as Aermet 100 and AF1410. Thus, the aim of this work was to get a deeper understanding on the impact of combined heat and cryogenic treatment on the stability of retained and reverted austenite. In order to characterize the evolution of the phase fraction of austenite during tempering at different temperatures and times, X-ray diffraction analyses were carried out. The stability of austenite, which was formed during tempering, was analyzed with dilatometric investigations by studying the transformation behavior of the austenite during cooling from tempering temperature down to −100°C. Additionally, transmission electron microscopy investigations were performed to characterize the chemical composition and phase distribution of austenite and martensite before and after tempering.

【 授权许可】

Unknown