Design and Chip Implementation of a SMI/MVDR Dual-Mode Beamformer for Wireless MIMO Communication Systems

IEEE Access

Kuan-Ting Chen¹  Yin-Tsung Hwang¹  Cheng-Yi Huang² 

[1] Department of Electrical Engineering, National Chung Hsing University, Taichung, Taiwan;Division of Computing and Artificial Intelligence, MediaTek Inc., Hsinchu, Taiwan;

关键词: Adaptive beamforming;    Cholesky decomposition;    Schur algorithm;    systolic array;    hardware accelerator;    chip design;   

DOI  :  10.1109/ACCESS.2020.2986028

来源: DOAJ

【 摘 要 】

This paper presents a low complexity chip design supporting dual-mode beamforming, i.e. sampling matrix inversion (SMI) and the minimum variance distortionless response (MVDR), for wireless Multiple-Input Multiple-Output (MIMO) communication systems. The auto-correlation matrix inversion is the critical computing kernel shared by the two beamforming schemes. To alleviate the computing complexity, the auto-correlation matrix is approximated by a Toeplitz counterpart, which can be decomposed efficiently by applying the Cholesky decomposition and the Schur algorithm. This leads to an O (N³) to O (N²) complexity reduction, where N is the matrix size, while preserving computing parallelism for the hardware design. In addition, a diagonal loading technique is employed to mitigate the stability problem when the matrix is ill-conditioned. Simulation results indicate that no performance loss is observed due to the algorithm simplification measures. A systolic array based mapping procedure converts the two beamforming algorithms to a unified hardware accelerator design with 80% shared circuitry. Complex-valued divisions are achieved by adopting a hardware efficient coordinate rotation digital computer (CORDIC) scheme. In chip implementation, a TSMC 90nm UTM process technology is used and the design specs largely follow the requirements of IEEE 802.11ac standard. The core size of the chip design is 0.68mm2. The measurement results show that the chip can operate up to 200MHz with a power consumption of 49.03mW. It can complete the computation of a new beamforming vector (of size 8) every 0.64us and exhibits the highest throughput among the 6 compared designs.

【 授权许可】

Unknown