期刊论文详细信息
Mathematics
Control Method for Flexible Joints in Manipulator Based on BP Neural Network Tuning PI Controller
Xiaopeng Li1  Hexu Yang1  Jinchi Xu1  Dongyang Shang1  Xingchao Qu1 
[1] School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China;
关键词: double inertia system;    gear;    friction;    BP neural network;    pole assignment;   
DOI  :  10.3390/math9233146
来源: DOAJ
【 摘 要 】

With the development of robot technology, integrated joints with small volume and convenient installation have been widely used. Based on the double inertia system, an integrated joint motor servo system model considering gear angle error and friction interference is established, and a joint control strategy based on BP neural network and pole assignment method is designed to suppress the vibration of the system. Firstly, the dynamic equation of a planetary gear system is derived based on the Lagrange method, and the gear vibration of angular displacement is calculated. Secondly, the vibration displacement of the sun gear is introduced into the motor servo system in the form of the gear angle error, and the double inertia system model including angle error and friction torque is established. Then, the PI controller parameters are determined by pole assignment method, and the PI parameters are adjusted in real time based on the BP neural network, which effectively suppresses the vibration of the system. Finally, the effects of friction torque, pole damping coefficient and control strategy on the system response and the effectiveness of vibration suppression are analyzed.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次