Influence of machine learning membership functions and degree of membership function on each input parameter for simulation of reactors

Scientific Reports

Azam Marjani¹  Ali Taghvaie Nakhjiri²  Mashallah Rezakazemi³  Rasool Pelalak⁴  Saeed Shirazian⁵ 

[1] Department for Management of Science and Technology Development, Ton Duc Thang University;Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University;Faculty of Chemical and Materials Engineering, Shahrood University of Technology;Institute of Research and Development, Duy Tan University;Laboratory of Computational Modeling of Drugs, South Ural State University;

DOI  :  10.1038/s41598-021-81514-y

来源: DOAJ

【 摘 要 】

Abstract To understand impact of input and output parameters during optimization and degree of complexity, in the current study we numerically designed a bubble column reactor with a single sparger in the middle of the reactor. After that, some input and output parameters were selected in the post-processing of the numerical method, and then the machine learning observation started to investigate the level of complexity and impact of each input on output parameters. The adaptive neuro-fuzzy inference system (ANFIS) method was exploited as a machine learning approach to analyze the gas–liquid flow in the reactor. The ANFIS method was used as a machine learning approach to simulate the flow of a 3D (three-dimensional) bubble column reactor. This model was also used to analyze the influence of input and output parameters together. More specifically, by analyzing the degree of membership functions as a function of each input, the level of complexity of gas fraction was investigated as a function of computing nodes (X, Y, and Z directions). The results showed that a higher number of membership functions results in a better understanding of the process and higher model accuracy and prediction capability. X and Y computing nodes have a similar impact on the gas fraction, while Z computing points (height of reactor) have a uniform distribution of membership function across the column. Four membership functions (MFs) in each input parameter are insufficient to predict the gas fraction in the 3D bubble column reactor. However, by adding two membership functions, all features of gas fraction in the 3D reactor can be captured by the machine learning algorithm. Indeed, the degree of MFs was considered as a function of each input parameter and the effective parameter was found based on the impact of MFs on the output.

【 授权许可】

Unknown