期刊论文详细信息
Processes | |
Flow Characteristics and Stress Analysis of a Parallel Gate Valve | |
Jun-ye Li1  Zhi-xin Gao1  Hui Wu1  | |
[1]SUFA Technology Industry Co., Ltd, CNNC, Suzhou 215129, China | |
关键词: gate valve; stress analysis; computational fluid dynamics (cfd); flow coefficient; loss coefficient; | |
DOI : 10.3390/pr7110803 | |
来源: DOAJ |
【 摘 要 】
Gate valves have been widely used in the piping system and have attracted a lot of attention from researchers. In this paper, a wedge-type double disk parallel gate valve is chosen to be analyzed. The Reynolds number varying from 200 to 500,000, and the valve opening degree varying from 20% to 100%, and the groove depth varying from 2.3 mm to 9 mm are chosen to investigate their effects on the flow and loss coefficients of the gate valve. The results show that the loss coefficient decreases and the flow coefficient increases with the increase of the Reynolds number and the valve opening degree, while with the increase of the groove depth, the loss coefficient barely changes, but the flow coefficient increases if the Reynolds number is larger than 10,000. In addition, the effects of the gaps between the disk and the limit stop on the stress distribution of the bolt are also investigated, and the results show that if the gaps are negative, high stress will act on the bolt at the contact position between the bolt and the limit stop.【 授权许可】
Unknown