Development of small satellite structure taking into account the use of laser measuring systems

Вестник Самарского университета: Аэрокосмическая техника, технологии и машиностроение

S. N. Shaposhnikov¹ 

[1] Joint Stock Company Space Rocket Centre Progress;

关键词: small satellite;    design documents;    top-down design;    information technologies;    ground processing;    precision measurements;    laser tracker;   

DOI  :  10.18287/2541-7533-2017-16-3-138-144

来源: DOAJ

【 摘 要 】

The article presents some information on the development of the design concept of a small satellite for Earth remote sensing. The AIST-2D engineering test small satellite is a co-development of the Progress Space-Rocket Centre and the Samara National Research University. The article sets forth the requirements to design of the small satellite that was developed taking into account the use of a laser-gaging system. The author describes the process of elaborating 3D design documents with the use of the top-down design method. The results of technical feasibility assessment are given, as well as the recommendations on configuring a small satellite to meet the above-mentioned requirements. The technology of measuring the actual positions of seats for hardware of high positional location accuracy is considered. The technology is based on the use of a laser tracker. The author obtained positive results of dummy tests that proved the correctness of the solutions chosen. The recommendations on further application of this technology are defined.

【 授权许可】

Unknown