期刊论文详细信息
Applied Engineering Letters
THE STRUCTURAL SOLUTIONS OF THE TIMBER ROOFS: JOINTS AND JOINING PLATES
Sebastian Kowański1  Kinga Brózda1  Jacek Selejdak1 
[1] Czestochowa University of Technology, Faculty of Civil Engineering, Czestochowa, Poland;
关键词: practical design solutions;    timber structures;    static scheme;    roof systems;    carpentry joints and connectors.;   
DOI  :  10.18485/aeletters.2018.3.2.4
来源: DOAJ
【 摘 要 】

In the article the authors present the practical design solutions regarding to structural timber roofs, especially the carpentry joints. The selected factors and parameters which should be respected during the correct static scheme of the roof structure selection are presented. The main differences between the two widely used and visually similar static schemes of roof systems are listed: the rafter – collar tie and the rafter – doubled collar tie roofing systems. A concise comparison of the structural work of these systems is presented. Primarily, in the paper the selected joints and joining plates were discussed in detail. The most popular traditional solutions of used carpentry joints and the new, alternative ones are described. The advantages and disadvantages of discussed solutions are pointed, as well as the advices on their practical use in the construction industry. As a conclusion, based on the conducted research it can be stated that using the innovative solutions of joints and joining plates avoids the most common assembly errors and are a good solution for joining the structural elements of the timber roofs.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次