Simulation and experimental verification of the filling process of semi-solid die forging for cup shell

Journal of Hebei University of Science and Technology

Dongxu WANG¹  Zichao WANG¹  Jianbo TAN¹ 

[1] School of Material Science and Engineering, Hebei University of Science and Technology, Shijiazhuang, Hebei 050018,China;

关键词: mechanics of materials;    semi-solid 6061;    cup-type shell;    semi-solid forging;    DEFORM;   

DOI  :  10.7535/hbkd.2015yx03014

来源: DOAJ

【 摘 要 】

The filling mold process of semi-solid alloy blank influences severely the forming and properties of finished piece. In this paper, DEFORM is applied to simulate the process of cup-type 6061 alloy die forging casting. The influences of the temperature of semi-solid alloy blank, preheating temperature, and downward press speed of pressure head on process of mold filling and velocity field are investigated. The results show that the mold filling of semi-solid alloy paste smoothly fills along the whole of mould cavity in “total wall thickness” form when the temperature of semi-solid alloy blank is 620 ℃, preheating temperature of pressure head is 200 ℃ and speed of pressure head is 40 mm/s. Along with the increase of the preheating temperature of pressure head, the filling process of the semi-solid alloy paste trends toward stable when the temperature of semi-solid alloy blank is 620 ℃ and the speed of pressure head is 20 mm/s. Along with the increasing of the temperature of semi-solid alloy, the process of mould filling becomes off balance and the liquid becomes turbulent flow. The velocity field in the process of mould filling affects severely the structure uniformity of the finished product.

【 授权许可】

Unknown