Revisiting Total Particle Number Measurements for Vehicle Exhaust Regulations

Atmosphere

Panagiota Dilara¹  Giorgio Martini²  Barouch Giechaskiel²  Anastasios Melas²  Leonidas Ntziachristos³ 

[1] European Commission, DG-GROW, 1040 Brussels, Belgium;Joint Research Centre (JRC), European Commission, 21027 Ispra, Italy;Laboratory of Heat Transfer and Environmental Engineering, Aristotle University Thessaloniki, 54124 Thessaloniki, Greece;

关键词: primary aerosol;    fresh aerosol;    secondary aerosol;    nucleation mode;    vehicle emissions;    road transport;   

DOI  :  10.3390/atmos13020155

来源: DOAJ

【 摘 要 】

Road transport significantly contributes to air pollution in cities. Emission regulations have led to significantly reduced emissions in modern vehicles. Particle emissions are controlled by a particulate matter (PM) mass and a solid particle number (SPN) limit. There are concerns that the SPN limit does not effectively control all relevant particulate species and there are instances of semi-volatile particle emissions that are order of magnitudes higher than the SPN emission levels. This overview discusses whether a new metric (total particles, i.e., solids and volatiles) should be introduced for the effective regulation of vehicle emissions. Initially, it summarizes recent findings on the contribution of road transport to particle number concentration levels in cities. Then, both solid and total particle emission levels from modern vehicles are presented and the adverse health effects of solid and volatile particles are briefly discussed. Finally, the open issues regarding an appropriate methodology (sampling and instrumentation) in order to achieve representative and reproducible results are summarized. The main finding of this overview is that, even though total particle sampling and quantification is feasible, details for its realization in a regulatory context are lacking. It is important to define the methodology details (sampling and dilution, measurement instrumentation, relevant sizes, etc.) and conduct inter-laboratory exercises to determine the reproducibility of a proposed method. It is also necessary to monitor the vehicle emissions according to the new method to understand current and possible future levels. With better understanding of the instances of formation of nucleation mode particles it will be possible to identify its culprits (e.g., fuel, lubricant, combustion, or aftertreatment operation). Then the appropriate solutions can be enforced and the right decisions can be taken on the need for new regulatory initiatives, for example the addition of total particles in the tailpipe, decrease of specific organic precursors, better control of inorganic precursors (e.g., NH₃, SO_x), or revision of fuel and lubricant specifications.

【 授权许可】

Unknown