A Novel Method for Conventional Logging Prediction of Brittleness Index: A Case of Tight Sandstone in Western Ordos Basin

Frontiers in Energy Research

Ya Li²  Jiwu Fan²  Lijing Chang³  Qiqi Lyu⁴  Jingzhe Guo⁵  Shuai Wang⁶ 

[1] Department of Geology, Northwest University, Xi’an, China;Exploration and Development Research Institute, Changqing Oil Field Company Ltd., CNPC, Xi’an, China;Oil and Gas Technology Research Institute, Changqing Oil Field Company Ltd., CNPC, Xi’an, China;School of Geoscience, Yangtze University, Wuhan, China;State Key Laboratory of Continental Dynamics, Northwest University, Xi’an, China;Tubular Goods Research Institute, CNPC, Xi’an, China;

关键词: Ordos Basin;    tight sandstone;    brittleness index;    conventional logging;    prediction method;   

DOI  :  10.3389/fenrg.2022.819078

来源: DOAJ

【 摘 要 】

Brittleness index is an important parameter for the exploration and development of tight sandstone reservoir. In this paper, a new method for calculating brittleness index using conventional logging data was established to find the high-quality exploration and development target area of tight sandstone reservoir in He8 Member of Permian in the western margin of the Ordos Basin. Firstly, the mineral composition and content of rock samples in the study area were analyzed by rock mineral X-ray diffraction, and the brittleness index was calculated according to the mineral content with the average of 70.85%. Then, three kinds of brittleness index logging prediction models were obtained by conventional logging curves such as natural gamma and compressional wave interval transit time. Each prediction model was corrected by the brittleness index calculated according to the X-ray diffraction experiment, and the correlation coefficients were 0.83, 0.58, and 0.71, respectively. Finally, through multiple regression, the comprehensive equation for brittleness index prediction was established by combining these three kinds of models. According to the example of the specific well in the study area, the brittleness index predicted by conventional logging is highly matched with the interpretation results of array acoustic logging with the correlation coefficient of 0.90, which means the accuracy of the comprehensive equation has been verified. The new method can evaluate reservoir brittleness by conventional logging data in the absence of rock sample test data and popularize the application of brittleness index in oil and gas field exploration and development.

【 授权许可】

Unknown