Electrochemical Characteristics of Titanium for Dental Implants in Case of the Electroless Surface Modification

Archives of Metallurgy and Materials

Klimecka-Tatar D.¹ 

[1] CZESTOCHOWA UNIVERISTY OF TECHNOLOGY, INSTITUTE OF PRODUCTION ENGINEERING, 69 DABROWSKIEGO STR., 42-201 CZESTOCHOWA, POLAND;

关键词: titanium implant;    phosphating;    conversion layer;    artificial saliva;    potentiokinetic curves;   

DOI  :  10.1515/amm-2016-0156

来源: DOAJ

【 摘 要 】

In the paper the results of research under effect of electroless phosphate coating of titanium dental implants on potentiokinetic polarization characteristic obtained in artificial saliva were presented. On the basis of electrochemical studies it was concluded that the electroless process of phosphating beneficialy effect on corrosion characteristic of titanium determined in solution simulating the oral cavity. Furthermore, the proposed technique of chemical treatment of titanium surface is conducive to the homogeneous development of the surface, which is extremely important from the point of view of titanium implants biointegration. Phosphating treatment affect on the development of surface geometry, resulting in a slight increase in roughness parameters (Ra, Rz and Rmax). The temperature increase of electroless phosphating treatment promotes the rate of conversion layer formation, whereas the effect of temperature of the chemical treatment efficiency is secondary important at longer exposure times (e.g. 45 minutes).

【 授权许可】

Unknown