Performance Evaluation of Analog Beamforming with Hardware Impairments for mmW Massive MIMO Communication in an Urban Scenario

Sensors

Volker Braun¹  Hardy Halbauer¹  Paolo Baracca¹  Sonia Gimenez²  Sandra Roger²  David Martín-Sacristán²  Jose F. Monserrat² 

[1] Nokia Bell Labs, Stuttgart 70435, Germany;iTEAM Research Institute, Universitat Politècnica de València, Valencia 46022, Spain;

关键词: massive MIMO;    analog beamforming;    hardware impairments;    millimeter-wave;   

DOI  :  10.3390/s16101555

来源: DOAJ

【 摘 要 】

The use of massive multiple-input multiple-output (MIMO) techniques for communication at millimeter-Wave (mmW) frequency bands has become a key enabler to meet the data rate demands of the upcoming fifth generation (5G) cellular systems. In particular, analog and hybrid beamforming solutions are receiving increasing attention as less expensive and more power efficient alternatives to fully digital precoding schemes. Despite their proven good performance in simple setups, their suitability for realistic cellular systems with many interfering base stations and users is still unclear. Furthermore, the performance of massive MIMO beamforming and precoding methods are in practice also affected by practical limitations and hardware constraints. In this sense, this paper assesses the performance of digital precoding and analog beamforming in an urban cellular system with an accurate mmW channel model under both ideal and realistic assumptions. The results show that analog beamforming can reach the performance of fully digital maximum ratio transmission under line of sight conditions and with a sufficient number of parallel radio-frequency (RF) chains, especially when the practical limitations of outdated channel information and per antenna power constraints are considered. This work also shows the impact of the phase shifter errors and combiner losses introduced by real phase shifter and combiner implementations over analog beamforming, where the former ones have minor impact on the performance, while the latter ones determine the optimum number of RF chains to be used in practice.

【 授权许可】

Unknown