Homogenization Method to Calculate the Stiffness Matrix of Laminated Composites

Eng

Rafic Younes¹  Mohamad Abbas Kaddaha¹  Pascal Lafon² 

[1] Faculty of Engineering, Lebanese University, Beirut 1002, Lebanon;LASMIS, University of Technology of Troyes, 10420 Troyes, France;

关键词: Chamis model;    compliance matrix;    homogenization;    laminate;    composite;   

DOI  :  10.3390/eng2040026

来源: DOAJ

【 摘 要 】

New analytical models have been developed for predicting equivalent Young’s and shear moduli of laminate composites. Sets of procedures and calculations are presented in order to obtain equivalent properties in all levels, lamina and laminate. An ultimate path to predict the mechanical properties of laminated composites on the perspective of the material, orientation, and thickness has been developed. By calculating the mechanical properties using Chamis model then an Objectif function with five norms, these norms allow the mechanical properties to be examined and the ultimate answer to be predicted. Another model discusses an alternative concept of equivalent lamina elements (ELEs) by first using Chamis model for hybrid composites. Next, the ELEs are laminated in the direction and integrated into the compliance matrix for each ply. In addition, four new Generalization models for equivalence in thickness and in angle are presented in this paper. The analytical results are validated against other developed models in published articles as well as experimental results. Numerical case studies were conducted to assess the precision of results from the suggested models. The results demonstrated the capability and efficiency of the presented models for predicting the mechanical properties of multi-layer/multi-material laminate composites under different orientation conditions.

【 授权许可】

Unknown