Design of Optical Tunnel Switching Networks for Big Data Applications

Applied Sciences

Yu-Yun Lee¹  Bor-Tauo Chen²  Yuh-Jiuh Cheng²  Cheng-Ping Wu² 

[1] Accton Technology Corporation, Hsinchu Science Park, Hsinchu 30077, Taiwan;Broadband Networks Laboratory, Telecommunication Laboratories, Chunghwa Telecom Co., Ltd., Taoyuan City 32601, Taiwan;

关键词: wavelength selective switch;    torus topology network;    optical tunnel switching network;   

DOI  :  10.3390/app10062098

来源: DOAJ

【 摘 要 】

In this paper, we proposed large-scale optical tunnel switching networks based on the Torus topology network with WSS (Wavelength Selective Switch) for future big data applications. All nodes of the large-scale optical tunnel switching networks use WSS switch modules, and the communications between nodes use multiple λs (wavelengths), where a tunnel is established with a wavelength which can be reused. The widely used MEMS (Micro-Electro-Mechanical Systems) and LCoS (Liquid Crystal on Silicon) technologies are all millisecond-level switching speeds, so the frame size of the optical frame switch is very large, and this will reduce switching performance. Therefore, they are only suitable for optical tunnel switching networks design, but are not suitable for optical frame switch design. This multi-plane Torus topology network architecture not only increases network throughput, but also has fault tolerance to increase network reliability. When the traffic is changed, the number of tunnels between nodes can be scheduled in time to balance the load traffic and avoid traffic loss. Therefore, it can not only schedule the number of tunnels in time to balance the load traffic, in order to avoid traffic loss, but also because the channel is fixedly established, this does not generate any buffer delay, and this because of the transmission using optical transmission unlimited speed, so it is a good choice for future big data applications that require high speed, high bandwidth and low latency.

【 授权许可】

Unknown