Ag Nanoparticle-Decorated MoS2 Nanosheets for Enhancing Electrochemical Performance in Lithium Storage

Nanomaterials

ThangPhan Nguyen¹  IlTae Kim¹ 

[1] Department of Chemical and Biological Engineering, Gachon University, Seongnam-si 13120, Gyeonggi-do, Korea;

关键词: MoS₂;    Ag;    nanosheets;    nanoparticle;    lithium-ion battery;    high rate;   

DOI  :  10.3390/nano11030626

来源: DOAJ

【 摘 要 】

Metallic phase 1T MoS₂ is a well-known potential anode for enhancing the electrochemical performance of lithium-ion batteries owing to its mechanical/chemical stability and high conductivity. However, during the lithiation/delithiation process, MoS₂ nanosheets (NSs) tend to restack to form bulky structures that deteriorate the cycling performance of bare MoS₂ anodes. In this study, we prepared Ag nanoparticle (NP)-decorated 1T MoS₂ NSs via a liquid exfoliation method with lithium intercalation and simple reduction of AgNO₃ in NaBH₄. Ag NPs were uniformly distributed on the MoS₂ surface with the assistance of 3-mercapto propionic acid. Ag NPs with the size of a few nanometers enhanced the conductivity of the MoS₂ NS and improved the electrochemical performance of the MoS₂ anode. Specifically, the anode designated as Ag3@MoS₂ (prepared with AgNO₃ and MoS₂ in a weight ratio of 1:10) exhibited the best cycling performance and delivered a reversible specific capacity of 510 mAh·g⁻¹ (approximately 73% of the initial capacity) after 100 cycles. Moreover, the rate performance of this sample had a remarkable recovery capacity of ~100% when the current decreased from 1 to 0.1 A·g⁻¹. The results indicate that the Ag nanoparticle-decorated 1T MoS₂ can be employed as a high-rate capacity anode in lithium-ion storage applications.

【 授权许可】

Unknown