Selective Magnetic Abrasive Finishing of Nano-Thickness IZO-Coated Pyrex Glass Using Acoustic Emission Monitoring and Artificial Neural Network

IEEE Access

Jungsun Kim¹  Hyojeong Kim²  Seoung Hwan Lee³ 

[1] Department of Computer Science and Engineering, Hanyang University, Ansan, South Korea;Department of Mechanical Design Engineering, Graduate School, Hanyang University, Seoul, South Korea;Department of Mechanical Engineering, Hanyang University, Ansan, South Korea;

关键词: Acoustic emission monitoring;    artificial neural network;    coating-substrate boundary;    magnetic abrasive finishing;    selective nano finishing;    surface roughness;   

DOI  :  10.1109/ACCESS.2019.2942689

来源: DOAJ

【 摘 要 】

In this study, a novel setup for a nanoscale finishing process - magnetic abrasive finishing (MAF) - was investigated together with in-process monitoring using acoustic emissions (AE). A specially fabricated direction control piece with a neodymium magnet was attached to an MAF setup to perform surface finishing of thin-film (IZO) coated Pyrex glass workpieces within a selective area. For the selective finishing experiments, design of experiment (DOE) was applied to optimize the surface roughness of the workpieces. In addition, an acoustic emission (AE) sensor, which can effectively monitor surface roughness and process states during ultraprecision machining/polishing of nanoscale workpieces, was adopted to detect the depth of the polished surface during MAF. The experimental results show that the proposed MAF setup produces uniform surfaces with nano-level surface roughness in a confined (target) area. Moreover, AE monitoring appears to have strong correlations with process states and sufficient sensitivity to detect the critical thickness (the end point of the coating layer). The processed AE signals were utilized as input parameters for an artificial neural network (ANN) to determine whether the polishing was reached to the coating-substrate (Pyrex) boundary. With the proposed polishing and monitoring scheme, controlled nano-finishing of a thin film coated material are feasible in a selective area within specific thickness/layer.

【 授权许可】

Unknown