Wind Inertial Response Based on the Center of Inertia Frequency of a Control Area

Energies

Emir Nukic¹  Mirza Kusljugic¹  Alija Mujcinagic² 

[1] Faculty of Electrical Engineering, University of Tuzla, 75000 Tuzla, Bosnia and Herzegovina;State Electricity Regulatory Commission, 75000 Tuzla, Bosnia and Herzegovina;

关键词: inertial response;    low inertia;    the center of inertia;    frequency response metrics;    wind integration;    PSS/E;   

DOI  :  10.3390/en13236177

来源: DOAJ

【 摘 要 】

As a result of the increased integration of power converter-connected variable speed wind generators (VSWG), which do not provide rotational inertia, concerns about the frequency stability of interconnected power systems permanently arise. If the inertia of a power system is insufficient, wind power plants’ participation in the inertial response should be required. A trendy solution for the frequency stability improvement in low inertia systems is based on utilizing so-called “synthetic” or “virtual” inertia from modern VSWG. This paper presents a control scheme for the virtual inertia response of wind power plants based on the center of inertia (COI) frequency of a control area. The PSS/E user written wind inertial controller based on COI frequency is developed using FORTRAN. The efficiency of the controller is tested and applied to the real interconnected power system of Southeast Europe. The performed simulations show certain conceptual advantages of the proposed controller in comparison to traditional schemes that use the local frequency to trigger the wind inertial response. The frequency response metrics, COI frequency calculation and graphical plots are obtained using Python.

【 授权许可】

Unknown