Vision-Aided RAIM: A New Method for GPS Integrity Monitoring in Approach and Landing Phase

Sensors

Jinling Wang¹  Xianbin Cao²  Jun Zhang²  Rui Li²  Li Fu² 

[1] School of Civil and Environmental Engineering, UNSW Australia, Sydney NSW 2052, Australia;School of Electronic and Information Engineering, Beihang University, Beijing 100191, China;

关键词: GPS;    RAIM;    aviation navigation;    approach and landing phase;    computervision;    VA-RAIM;   

DOI  :  10.3390/s150922854

来源: DOAJ

【 摘 要 】

In the 1980s, Global Positioning System (GPS) receiver autonomous integrity monitoring (RAIM) was proposed to provide the integrity of a navigation system by checking the consistency of GPS measurements. However, during the approach and landing phase of a flight path, where there is often low GPS visibility conditions, the performance of the existing RAIM method may not meet the stringent aviation requirements for availability and integrity due to insufficient observations. To solve this problem, a new RAIM method, named vision-aided RAIM (VA-RAIM), is proposed for GPS integrity monitoring in the approach and landing phase. By introducing landmarks as pseudo-satellites, the VA-RAIM enriches the navigation observations to improve the performance of RAIM. In the method, a computer vision system photographs and matches these landmarks to obtain additional measurements for navigation. Nevertheless, the challenging issue is that such additional measurements may suffer from vision errors. To ensure the reliability of the vision measurements, a GPS-based calibration algorithm is presented to reduce the time-invariant part of the vision errors. Then, the calibrated vision measurements are integrated with the GPS observations for integrity monitoring. Simulation results show that the VA-RAIM outperforms the conventional RAIM with a higher level of availability and fault detection rate.

【 授权许可】

Unknown