Optimal selection of distributed generating units and its placement for voltage stability enhancement and energy loss minimization

Ain Shams Engineering Journal

卷:9

Pankita Mehta¹  Praghnesh Bhatt¹  Vivek Pandya² 

[1] Department of Electrical Engineering, C.S. Patel Institute of Technology, CHARUSAT, Changa, Gujarat, India;

[2] Department of Electrical Engineering, School of Technology, PDPU, Gandhinagar, Gujarat, India;

关键词: Continuation power flow (CPF);    Distributed generation (DG);    Eigenvalue;    Modal analysis;    Participation factor;   

DOI  :  10.1016/j.asej.2015.10.009

来源: DOAJ

【 摘 要 】

The integration of distributed generation (DG) in distribution network may significantly affect its performance. Transmission networks are no longer accountable solely for voltage security issues in distribution networks with penetration of DGs. The reactive power support from the DG sources greatly varies with the type of DG units and may potentially distress the larger portion of the network from the voltage stability aspects. This paper presents the analysis for the selection of the best type of DG unit among different categories and its optimal location that can enhance the voltage stability of distribution network with simultaneous improvement in voltage profile. Voltage sensitivity index and bus participation factors derived from continuation power flow and Modal Analysis, respectively, are used together for voltage stability assessment and placement of DGs. Changes in mode shapes and participation factors with the placement of DGs are comprehensively analyzed for 33 and 136 nodes radial distribution network.

【 授权许可】

Unknown