Material Properties Influencing the Charge Decay of Electret Filters and their Impact on Filtration Performance

Polymers

卷:12

Jinwook Lee¹  Jooyoun Kim¹ 

[1] Department of Textiles, Merchandising and Fashion Design, Seoul National University, Seoul 08826, Korea;

关键词: electret;    charge;    filtration;    humidity;    thermal;    aging;   

DOI  :  10.3390/polym12030721

来源: DOAJ

【 摘 要 】

Electret filters as opposed to mechanical filters display the enhanced ability to capture airborne particles with the electrostatic attraction. However, the environmental aging during shelf-life or use may cancel its benefit by dissipating the charges. This work investigates the polymeric attributes influencing the charge decay and the electrostatic filtration of electret filters, employing polymers with different dielectric constants (ε_r) and wettability. As accelerated aging, high temperature (120 °C) or high humidity (25 °C, 90% RH) was applied to the electret filters for 48 h. For the humidity aging, wetting property of material was a critical factor affecting the charge decay and the filtration performance, as the absorbed water increases the electrical conductivity. For the thermal aging, the material with the highest ε_r deteriorated the electric potential and the filtration performance by the largest extent, due to the lower band gap energy for charge transfer. The results of this study implicate that ε_r and wettability are important material parameters influencing the electric conductivity and chain mobility, and they can be used as convenient predictors for charge retention capacity affecting the robust electrostatic filtration performance.

【 授权许可】

Unknown