Thermal influence of homogeneously heated Y- shaped flipper on flowing stream in an unwavering rectangular domain

Case Studies in Thermal Engineering

卷:21

M.Y. Malik¹  Khalil Ur Rehman²  Wael Al-Kouz³  Qasem M. Al-Mdallal⁴  Zahra Abdelmalek⁵ 

[1] Corresponding author.;

[2] Faculty of Medicine, Duy Tan University, Da Nang 550000, Vietnam;

[3] Department of Mathematical Sciences, United Arab Emirates University, P.O. Box 15551, Al Ain, Abu Dhabi, United Arab Emirates;

[4] Department of Mathematics, Air University, PAF Complex E-9, Islamabad, 44000, Pakistan;

[5] Institute of Research and Development, Duy Tan University, Da Nang 550000, Vietnam;

关键词: Heat transfer;    Heated Y-Shaped fin;    Rectangular domain;    Hybrid meshing;    Finite element method;   

DOI  :  

来源: DOAJ

【 摘 要 】

The current study offers the numerical findings on uniformly heated Y-shaped fin embedded in a rectangular domain having height 0.6 m and 2 m length. The no-slip condition is carried at left, upper and lower wall of channel. These walls are taken cold as well. Both the Neumann and adiabatic conditions are implemented at the right wall. The cold Newtonian fluid enters with the parabolic velocity profile from inlet of channel. The problem is controlled mathematically in terms of partial differential equations. The finite element method is adopted along with hybrid meshing scheme to report acceptable solution. The velocity, pressure and temperature distributions around the heated Y-shaped fin are offered graphically. The temperature findings are reported for the cold, adiabatic and heated tips of Y-shaped fin. The line integration around Y-shaped fin is performed to evaluate the lift and drag coefficients values. The lift coefficient and drag coefficient corresponds the lift force and drag force experienced by the heated Y-shaped fin. It is observed that for the higher values of Reynolds number the lift coefficient shows an inciting values while the drag coefficient shows decline nature.

【 授权许可】

Unknown