Preparation of an MHC Alloy by Direct Doping of HfC and Its High Temperature Oxidation and Volatilization Behavior

Materials

卷:15

Haixing Sun¹  Shouman Liu¹  Miao Wang¹  Shuangping Yang¹  Jie Dong¹ 

[1] School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China;

关键词: molybdenum alloy;    MHC alloy;    high energy ball milling;    oxidation;    oxidation weight loss;    volatilization;   

DOI  :  10.3390/ma15051958

来源: DOAJ

【 摘 要 】

An HfC-doped molybdenum (Mo-Hf-C; MHC) alloy was prepared via a powder metallurgy process, including dry direct doping followed by ball-milling, cold-isotactic-pressing, and vacuum sintering. An oxidation comparison experiment was conducted, and the oxidation and volatilization behaviors were analyzed using the mass change, volatile generation rate, and morphology transformation. The results show that relatively uniform powder morphology can be obtained by the direct doping of carbide and high-energy ball milling. The oxidation of the MHC alloy at a lower temperature was characterized by the oxygen-absorption and a slight weight gain, while at a higher temperature and longer holding time, it was characterized by the mass volatile weight loss. A significant weight change appeared at 800 °C for 30 min with a weight loss rate of 4.8%. Surface oxidation products developed horizontally from ridged oxides at lower temperature stages to a flaky oxide layer at higher temperatures. The peeling of the oxide layer was the result of interfacial pore development, which led to exposure of the alloy matrix and further oxidation. Based on the oxidation and volatilization characteristics of HfC-doped MHC alloys, we conclude that the oxidation and volatilization of the MHC alloy conformed to the general law; however, the significant weight loss temperature, weight loss rate, volatilization temperature, and volatilization rate were improved compared with pure molybdenum and traditional molybdenum alloys, thus, indicating that the precipitation of the second phase HfC particles at the grain boundaries and within the grains can inhibit the oxidation and volatilization of matrix elements to a certain extent.

【 授权许可】

Unknown