Materials | 卷:8 |
Microstructural Evolution at Micro/Meso-Scale inan Ultrafine-Grained Pure Aluminum Processed by Equal-Channel Angular Pressing with Subsequent Annealing Treatment | |
Bin Guo1  Debin Shan1  Jie Xu1  Jianwei Li2  Guohua Fan2  Xiaocheng Zhu2  | |
[1] Key Laboratory of Micro-systems and Micro-structures Manufacturing of Ministry of Education,Harbin Institute of Technology, Harbin 150080, China; | |
[2] School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China; | |
关键词: microstructure; micro/meso-forming; ultrafine grains; ECAP; aluminum; | |
DOI : 10.3390/ma8115391 | |
来源: DOAJ |
【 摘 要 】
Micro-forming with ultrafine-grained (UFG) materials is a promising direction for the fabrication of micro-electro-mechanical systems (MEMS) components due to the improved formability, good surface quality, and excellent mechanical properties it provides. In this paper, micro-compression tests were performed using UFG pure aluminum processed by equal-channel angular pressing (ECAP) with subsequent annealing treatment. Microstructural evolution was investigated by electron back-scattered diffraction (EBSD) and transmission electron microscopy (TEM). The results show that microstructural evolutions during compression tests at the micro/meso-scale in UFG pure Al are absolutely different from the coarse-grained (CG) materials. A lot of low-angle grain boundaries (LAGBs) and recrystallized fine grains are formed inside of the original large grains in CG pure aluminum after micro-compression. By contrast, ultrafine grains are kept with few sub-grain boundaries inside the grains in UFG pure aluminum, which are similar to the original microstructure before micro-compression. The surface roughness and coordinated deformation ability can be signmicrostructure; micro/meso-forming; ultrafine grains; ECAP; aluminumificantly improved with UFG pure aluminum, which demonstrates that the UFG materials have a strong potential application in micro/meso-forming.
【 授权许可】
Unknown