A New Approach to the Design of a CNC Machine for Making Orthotic Moulds

Tehnički Vjesnik

卷:25

Alan Mutka¹  Zoran Vrhovski¹  Josip Nižetić²  Pero Raos³  Tomislav Galeta³  Jadranka Vuković Obrovac⁴  Karlo Obrovac⁴ 

[1] Bjelovar University of Applied Sciences, Trg Eugena Kvaternika 4, 43000 Bjelovar, Croatia;

[2] COGNITUS d.o.o., Remetinec 42, 10000 Zagreb, Croatia;

[3] Mechanical Engineering Faculty in Slavonski Brod, Trg I. B. Mazuranic 2, 35000 Slavonski Brod, Croatia;

[4] ORTOGEN d.o.o., Remetinec 42, 10000 Zagreb, Croatia;

关键词: CAD/CAM;    O&P;    spinal orthosis;    3D scanning;   

DOI  :  

来源: DOAJ

【 摘 要 】

This paper is about defining a different novel concept of a simple machine for producing spinal orthosis moulds. Should such a machine be developed, the required functionality with a special emphasis on low price is to be achieved. The paper considers the issues regarding the kinematics and feasibility confirmation as related to the concept. A CAD model made for the purpose of simulation and activities related to the software development for generating tool trajectories along with the belonging kinematics and trajectory visualization were carried out.

【 授权许可】

Unknown