Structural behavior of tree-like steel columns subjected to combined axial and lateral loads

Journal of the Mechanical Behavior of Materials

卷:31

Shadhan Khalid K.¹  Dekhn Rabab C.¹ 

[1] Department of Civil Engineering, University of Babylon, Hillah, Iraq;

关键词: tree-like columns;    abaqus;    steel columns;    finite element;   

DOI  :  10.1515/jmbm-2022-0030

来源: DOAJ

【 摘 要 】

Few studies have been conducted on the structural behavior of steel columns with branches that are called tree-like columns. These kinds of columns have been used in many structures around the world. The purpose of this study is to investigate the failure load, vertical and lateral displacement, and failure mode of tree-like columns subjected to a combination of axial and lateral loading. The ratio of lateral load to axial load has been selected as the design variable. A finite element model with one branching level and two branches within the level was first developed using ABAQUS/CAE 2017 software. The model was verified with experimental results. The axial failure load and axial and lateral displacement were determined and compared for different loading ratios. The failure mode was also studied for different loading conditions. The results showed that the axial failure load decreased significantly by 54, 42, and 28% when lateral/axial loading ratio increased by 20, 40, and 60%, respectively. There was no significant decrease when lateral/axial loading ratio was more than 60%, while axial and lateral displacements increased significantly by 24% for each 20% increase in the loading ratio. Local buckling was observed as a failure mode when only gravity load is applied, while combined load resulted in lateral buckling.

【 授权许可】

Unknown