Effects of hard chrome and MoN-coated stainless steel on wear behaviour and tool life model under two-body abrasion wear testing

Metalurgija

卷:56

C. Saikaew¹  P. Srisattayakul¹  A. Wisitsoraat² 

[1] Department of Industrial Engineering, Khon Kaen University, Khon Kaen Thailand;

[2] National Electronics and Computer Technology Center, Pathumthani Thailand;

关键词: AISI 316 stainless steel;    coatings;    abrasion wear testing;    properties;    Taylor’s equation;    Monte Carlo;   

DOI  :  

来源: DOAJ

【 摘 要 】

The objectives of this study were to investigate the effect of the electroplated hard chrome (HC) and the MoNcoated AISI 316 stainless steel coatings on weight loss under two-body abrasion wear testing and to predict the tool life of both materials used as a fishing net-weaving machine component, namely the hook. Both materials were used to carry out the wear experiments under two-body abrasion behavior. These specimens were wear tested with the in-house wear testing apparatus base on ASTM: G133-05 standard. The Taylor’s equation was used to formulate the tool life model whereas the Monte Carlo simulation was used to predict the tool life of the machine part. The results showed that the MoN-HC exhibited higher wear resistance than that of the HC.

【 授权许可】

Unknown