Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Applied Sciences

卷:10

Yanhua Liao¹  Hanqing Zhuge¹  Xu Xie¹  Qin Tian² 

[1] College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310012, China;

[2] School of Civil Engineering and Architecture, Nanchang University, Nanchang 330031, China;

关键词: steel;    ultra-low cycle fatigue;    prediction method;    continuum damage mechanics;    cyclic void growth model;   

DOI  :  10.3390/app10020679

来源: DOAJ

【 摘 要 】

Cyclic void growth model (CVGM) and continuum damage mechanics (CDM) model are suitable for predicting the damage of ultra-low-cycle fatigue (ULCF) theoretically. However, studies on the prediction of ultra-low-cycle fatigue (ULCF) damage is lacking. To determine which method is better, we used the two methods to predict the damage of ULCF. Firstly, uniaxial tensile and large strain cycle tests were performed on the base metal, weld metal and heat-affected zone and the material parameters were calibrated respectively. The uniaxial plastic strain threshold and toughness parameter of weld metal were minimum, and the dispersion was maximum. The finite element models of the base metal and weld specimens were established based on the calibrated parameters, and the ULCF damage was predicted. Compared with the CVGM model, the CDM model can predict the fatigue life and the relationships among the fatigue and fracture lives, the post-fracture path and the number of cycles to initial damage. The parameter calibration is simple. CDM is superior to CVGM in predicting the ULCF damage of steel and its weld joints.

【 授权许可】

Unknown