Stereovision Tracking System for Monitoring Loader Crane Tip Position

IEEE Access

卷:8

Ryszard Zietek¹  Lukasz Marchewka¹  Marek Grudzinski¹  Miroslaw Pajor¹ 

[1] Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology, Szczecin, Poland;

关键词: Mechatronics;    cameras;    calibration;    machine vision;    stereo vision;    remote monitoring;   

DOI  :  10.1109/ACCESS.2020.3043414

来源: DOAJ

【 摘 要 】

This paper presents the idea and experimental tests of a non-stationary stereovision system used for supervision of a loading crane. The system based on two independent gimbals, equipped with cameras, allows simultaneously to measure and track a group of individual spatial points. The four steps calibration procedure is required for each gimbal axis, camera optics, gimbals positions, and loading crane position. Modern camera systems have been widely applied in several fields of the industry allowing for accurate measurements and real-time quality control. The systems based on stereo camera models and appropriate image analysis algorithms can measure a group of spatial points, complex surfaces, small displacements, or vibrations. There are also several vision systems such as laser tracker, camera mounted on fully controlled rotating head (called gimbal), or TOF camera, which can be used to follow and measure real-time object displacements. Unfortunately, they all have significant individual limitations explained in this paper. Accuracy tests of 3D measurements including active tracking of length pattern and crane tip have been performed within a selected working area. Based on reconstructed 3D data points, different types of geometric errors have been presented. The results revealed effects of accuracy degradation on the workspace boundaries and for higher observation angles, as well as 3D data bias suggesting mechanical issues. Several improvements in calibration and gimbal construction might result in far enough accuracy for normal operations of the crane.

【 授权许可】

Unknown