The influence of compaction pressure on the density and electrical properties of cordierite-based ceramics

Science of Sintering

卷:47

Đorđević N.¹  Filipović S.²  Pavlović V.B.²  Peleš A.²  Obradović N.²  Mitrić M.³ 

[1] Institute for Technology of Nuclear and Other Mineral Raw Materials, Belgrade;

[2] Institute of Technical Sciences of SASA, Belgrade;

[3] Vinča Institute of Nuclear Sciences, Belgrade;

关键词: mechanical activation;    density;    XRD;    SEM;    electrical properties;    cordierite;   

DOI  :  10.2298/SOS1501015O

来源: DOAJ

【 摘 要 】

Due to its characteristics, cordierite, 2MgO·2Al2O3·5SiO2, is a high-temperature ceramic material of a great scientific interest. Mechanical activation of the starting mixtures containing 5.00 mass% TiO2 was performed in a high-energy ball mill for 10 minutes. The compaction pressure varied from 0.5 to 6tcm-2 (49-588 MPa). The sintering process was performed at 1350ºC for four hours in the air atmosphere. The phase composition of the activated and sintered samples was analyzed using X-ray diffraction. Scanning electron microscopy was used to analyze the microstructure of both compacted and sintered samples. The authors have investigated the influence of compaction pressure on the sintered samples and their electrical properties.

【 授权许可】

Unknown