Multiple Input Multiple Output Resonant Inductive WPT Link: Optimal Terminations for Efficiency Maximization

Energies

卷:14

Ben Minnaert¹  Alessandra Costanzo²  Luciano Tarricone³  Giuseppina Monti³  Mauro Mongiardo⁴ 

[1] College of Applied Sciences, Odisee University, 9000 Ghent, Belgium;

[2] Department of Electrical, University of Bologna, 40126 Bologna, Italy;

[3] Department of Engineering for Innovation, University of Salento, 73100 Lecce, Italy;

[4] Department of Engineering, University of Perugia, 06123 Perugia, Italy;

关键词: resonant coils;    wireless power transfer;    inductive coupling;    optimal load;    multiple input multiple output;    power gain;   

DOI  :  10.3390/en14082194

来源: DOAJ

【 摘 要 】

In this paper a general-purpose procedure for optimizing a resonant inductive wireless power transfer link adopting a multiple-input-multiple-output (MIMO) configuration is presented. The wireless link is described in a general–purpose way as a multi-port electrical network that can be the result of either analytical calculations, full–wave simulations, or measurements. An eigenvalue problem is then derived to determine the link optimal impedance terminations for efficiency maximization. A step-by-step procedure is proposed to solve the eigenvalue problem using a computer algebra system, it provides the configuration of the link, optimal sources, and loads for maximizing the efficiency. The main advantage of the proposed approach is that it is general: it is valid for any strictly–passive multi–port network and is therefore applicable to any wireless power transfer (WPT) link. To validate the presented theory, an example of application is illustrated for a link using three transmitters and two receivers whose impedance matrix was derived from full-wave simulations.

【 授权许可】

Unknown