Effect of face-layer moisture content and face–core–face ratio of mats on the temperature and vapor pressure behavior during hot-pressing of wood-based panel manufacturing

Journal of Wood Science

卷:67

Kensuke Kukita¹  Yoichi Kojima¹  Hikaru Kobori¹  Kazushige Murayama²  Kohta Miyamoto²  Shigehiko Suzuki³ 

[1] Faculty of Agriculture, Shizuoka University;

[2] Forestry and Forest Products Research Institute;

[3] Shizuoka Professional University of Agriculture;

关键词: Wood-based panels;    Temperature behavior;    Vapor pressure behavior;    Hot-pressing;    Face-layer moisture;    Face–core–face ratio;   

DOI  :  10.1186/s10086-021-01974-8

来源: DOAJ

【 摘 要 】

Abstract Wood-based panels are made by consolidating mats of resinous wooden raw materials under a hot-pressing process. This study investigates the effect of face-layer moisture content (MC) and face–core–face (FCF) ratio of mats on the temperature and vapor pressure behavior during the hot-pressing process. Raising the face-layer MC and lowering the face-layer thickness was expected to reduce the time of reaching 100 °C in the hot-pressing process. When the temperature rise was limited or the core temperature decreased after reaching 100 °C (defined as plateau in this study), the mats with 25% and 30% face-layer MC with 1:2:1 FCF ratio reached the highest plateau core temperature, but required a longer time to complete the plateau. The relationship between core plateau temperature and maximum core vapor pressure was well described by the Antoine equation, which empirically models the vapor pressure as a function of temperature. The Antoine equation held across both face-layer MC series (varying face-layer MC at constant FCF ratio) and FCF series (varying FCF ratio at constant face-layer MC). The mat with 20% face-layer MC and 1:2:1 FCF ratio reached 180 °C within the shortest time, regardless of the evaluation conditions.

【 授权许可】

Unknown