A Review of Global Navigation Satellite System (GNSS)-Based Dynamic Monitoring Technologies for Structural Health Monitoring

Remote Sensing

卷:11

Tingye Tao¹  Ruizhi Chen²  Liang Chen²  Nan Shen²  Lei Wang²  Dewen Wu²  Jingbin Liu² 

[1] Hefei University of Technology, Hefei 230009, China;

[2] State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079, China;

关键词: dynamic monitoring;    GNSS;    SHM;    accelerometer;    high-rate;    denoising;    detrending;   

DOI  :  10.3390/rs11091001

来源: DOAJ

【 摘 要 】

In the past few decades, global navigation satellite system (GNSS) technology has been widely used in structural health monitoring (SHM), and the monitoring mode has evolved from long-term deformation monitoring to dynamic monitoring. This paper gives an overview of GNSS-based dynamic monitoring technologies for SHM. The review is classified into three parts, which include GNSS-based dynamic monitoring technologies for SHM, the improvement of GNSS-based dynamic monitoring technologies for SHM, as well as denoising and detrending algorithms. The significance and progress of Real-Time Kinematic (RTK), Precise Point Position (PPP), and direct displacement measurement techniques, as well as single-frequency technology for dynamic monitoring, are summarized, and the comparison of these technologies is given. The improvement of GNSS-based dynamic monitoring technologies for SHM is given from the perspective of multi-GNSS, a high-rate GNSS receiver, and the integration between the GNSS and accelerometer. In addition, the denoising and detrending algorithms for GNSS-based observations for SHM and corresponding applications are summarized. Challenges of low-cost and widely covered GNSS-based technologies for SHM are discussed, and problems are posed for future research.

【 授权许可】

Unknown