Anteroinferior bundle of the acromioclavicular ligament plays a substantial role in the joint function during shoulder elevation and horizontal adduction: a finite element model

Journal of Orthopaedic Surgery and Research

Farid Salamé Castillo¹  Joaquin Mura Mardones¹  Ausberto Velasquez Garcia²  Max Ekdahl Giordani³ 

[1] Department of Mechanical Engineering, Universidad Tecnica Federico Santa Maria, Santiago, Chile;Department of Orthopedic Surgery, Clinica Universidad de los Andes, Av. Plaza 2501, Las Condes, 7620157, Santiago, Chile;Department of Orthopedic Surgery, Hospital Militar de Santiago, Santiago, Chile;Department of Orthopedic Surgery, Clinica las Condes, Santiago, Chile;

关键词: Acromioclavicular ligament;    Finite element analysis;    Anteroinferior bundle;    Shoulder motion;    Acromioclavicular kinematics;   

DOI  :  10.1186/s13018-022-02966-0

来源: Springer

【 摘 要 】

BackgroundPostoperative acromioclavicular (AC) ligament deficiency has been identified as a common cause of failure after isolated coracoclavicular reconstruction. The two-bundle arrangement of the acromioclavicular ligament has recently been reported in histological and anatomical research. In addition, a clear structural advantage of the superoposterior bundle (SPB) over the less consistent anteroinferior bundle (AIB) was also found. However, the current understanding of the function of the acromioclavicular ligament in joint stability is based on uniaxial bone loading experiments and sequential ligament sectioning. Consequently, these rigid biomechanics models do not reproduce the coupled physiological kinematics, neither in the normal joint nor in the postoperative condition. Therefore, our goal was to build a quasi-static finite element model to study the function of the acromioclavicular ligament based on its biomechanical performance patterns using the benefits of computational models.MethodsA three-dimensional bone model is reconstructed using images from a healthy shoulder. The ligament structures were modeled according to the architecture and dimensions of the bone. The kinematics conditions for the shoulder girdle were determined after the osseous axes aligned to simulate the shoulder elevation in the coronal plane and horizontal adduction. Three patterns evaluated ligament function. The peak von Mises stress values were recorded using a clock model that identified the stress distribution. In addition, the variation in length and displacement of the ligament during shoulder motion were compared using a two-tailed hypotheses test. P values < 0.01 were considered statistically significant.ResultsThe peak von Mises stress was consistently observed in the AIB at 2:30 in coronal elevation (4.06 MPa) and horizontal adduction (2.32 MPa). Except in the position 2:00, statistically significant higher deformations were identified in the two bundles during shoulder elevation. The highest ligament displacement was observed on the Y- and Z-axes.ConclusionsThe AIB has the primary role in restricting the acromioclavicular joint during shoulder motion, even though the two bundles of the AC ligament have a complementary mode of action. During horizontal adduction, the SPB appears to prevent anterior and superior translation.

【 授权许可】

CC BY