Thermal conductivity and thermoelectric properties in 3D macroscopic pure carbon nanotube materials

Nanotechnology Reviews

article

Xueming Yang¹  Jixiang Cui¹  Ke Xue¹  Yao Fu²  Hanling Li³  Hong Yang⁴ 

[1] Department of Power Engineering, North China Electric Power University;Department of Aerospace Engineering and Engineering Mechanics, University of Cincinnati, United States of America;Department of Engineering Mechanics, Tsinghua University;Department of Electronic Engineering, North China Electric Power University

关键词: thermal conductivity;    carbon nanotubes;    thermoelectric properties;    Seebeck coefficient;   

DOI  :  10.1515/ntrev-2021-0013

学科分类：社会科学、人文和艺术（综合）

来源: De Gruyter

【 摘 要 】

Sintered carbon nanotube (CNT) blocks and porous CNT sponges were prepared, and their thermoelectric properties were measured. The maximum dimensionless thermoelectric figure-of-merit, ZT , at room temperature of the sintered single-walled carbon nanotube (SWCNT) block is 9.34 × 10 −5 , which is twice higher than that of the sintered multi-walled carbon nanotube (MWCNT) block in this work and also higher than that of other sintered MWCNT blocks reported previously. In addition, the porous MWCNT sponge showed an ultra-low thermal conductivity of 0.021 W/(m K) and significantly enhanced ZT value of 5.72 × 10 −4 at room temperature and 1 atm. This ZT value is higher than that of other 3D macroscopic pure CNT materials reported. The pronounced enhancement of the ZT in the porous MWCNT sponge is attributed to the ultra-low density, ultra-high porosity, and interconnected structure of the material, which lead to a fairly low thermal conductivity and better Seebeck coefficient. The finding of this work provides an understanding for exploring potential enhancement mechanisms and improving the thermoelectric properties of CNT-based thermoelectric composites.

【 授权许可】

CC BY