Sustainable utilization of a converter slagging agent prepared by converter precipitator dust and oxide scale

Green Processing and Synthesis

article

Bailong Liu¹  Zhaohui Zhang²  Longxin Sun²  Zhenghua Yang²  Lu Feng³ 

[1] School of Chemistry and Chemical Engineering, Xi’an University of Architecture and Technology;School of Metallurgical Engineering, Xi’an University of Architecture and Technology;Xi’an University of Architecture and Technology Huaqing College

关键词: converter slagging agent;    binder;    converter precipitator dust;    oxide scale;   

DOI  :  10.1515/gps-2020-0063

来源: De Gruyter

【 摘 要 】

A converter slagging agent was prepared using converter precipitator dust and oxide scale as raw materials and bentonite, calcium oxide, and soluble glass as binders. The influence of different binders on the strength of the converter slagging agent was studied. The optimum ratio of bentonite, calcium oxide, and sodium silicate was determined by orthogonal experiments. The chemical composition, strength, moisture content, alkalinity, and other indicators of the prepared converter slagging agent met the requirements for converter smelting. The drop intensity of the green pellet was 3.7 times, and the compressive strength of the dry pellet could reach 988.72 N/m 2 . Therefore, the sustainable utilization of converter precipitator dust and oxide scale could be realized by the preparation of a converter slagging agent.

【 授权许可】

CC BY