Material Decomposition in Low-Energy Micro-CT Using a Dual-Threshold Photon Counting X-Ray Detector

Frontiers in Physics

Isabel Goncalves¹  Rasmus Solem²  Martin Bech²  Till Dreier³ 

[1] Cardiovascular Research and Translational Studies, Clinical Sciences Malmö, Lund University, Malmö, Sweden;Skåne University Hospital, Malmö, Sweden;Department for Medical Radiation Physics, Clinical Sciences Lund, Lund University, Lund, Sweden;Department for Medical Radiation Physics, Clinical Sciences Lund, Lund University, Lund, Sweden;Excillum AB, Stockholm, Sweden;

关键词: material decomposition;    micro tomography;    x-ray imaging;    photon-counting detectors;    biomedical imaging;   

DOI  :  10.3389/fphy.2021.673843

来源: Frontiers

【 摘 要 】

Material decomposition in computed tomography is a method for differentiation and quantification of materials in a sample and it utilizes the energy dependence of the linear attenuation coefficient. In this study, a post-image reconstruction material decomposition method is constructed for a low-energy micro-CT setup using a photon counting x-ray detector. The low photon energy range (4–11 keV) allows for K-edge contrast separation of naturally occurring materials in organic tissue without the need of additional contrast agents. The decomposition method was verified using a phantom and its capability to decompose biomedical samples was evaluated with paraffin embedded human atherosclerotic plaques. Commonly, the necessary dual energy data for material decomposition is obtained by manipulating the emitted x-ray spectrum from the source. With the photon counting detector, this data was obtained by acquiring two energy window images on each side of the K-edge of one material in the sample. The samples were decomposed into three materials based on attenuation values in manually selected regions. The method shows a successful decomposition of the verification phantom and a distinct distribution of iron, calcium and paraffin in the atherosclerotic plaque samples. Though the decompositions are affected by beam hardening and ring artifacts, the method shows potential for spectral evaluation of biomedical samples.

【 授权许可】

CC BY