Treatment of Petrochemical wastewater by Modified electro-Fenton Method with Nano Porous Aluminum Electrode

Journal of Water and Environmental Nanotechnology

ARTICLE

Adimi, Maryam¹  Mohammadpour, Maziar¹  Fathinejadjirandehi, Hassan² 

[1] Department of Chemical Engineering, Farahan Branch, Islamic Azad University;Young researchers and Elite Club, Farahan Branch, Islamic Azad University

关键词: COD;    Electro-Fenton;    Nanoporous Aluminum Electrode;   

DOI  :  10.22090/jwent.2017.03.006

学科分类：数学（综合）

来源: Iranian Environmental Mutagen Society

【 摘 要 】

This research reported a study on COD removal from petrochemical wastewater (ml/l) by the electroFenton process via the effects of different parameters such as reaction time, current density, pH, H2 O2 / Fe2+ molar ratio, and volume fraction of H2 O2 . For this purpose, first, the Nanopores on the aluminum electrode surface were prepared as the AAO films were fabricated using the two-step anodization of 6063 aluminum alloy sheets at ambient temperature in sulfuric acid and phosphoric acid electrolyte solutions respectively.The nanostructures created on electrode confirmed by Scanning Electron Microscopy (SEM). Then, Efficiency of electrochemical oxidation process was tested by COD determination via electrolyte cell contain waste water, Fe2+, H2 O2 and AAO electrode based on experimental design. The optimum COD removal (65.03%) was obtained at pH of 2.96, the reaction time of 89.51 min, the current density of 69.57 mA, the H2 O2 /Fe2+ molar ratio of 3.42 and volume fraction of H2 O2 to petrochemical wastewater of 1.93 (ml/l).

【 授权许可】

CC BY