Physical Characterization and Optimization of Fineness Moduli of Natural Sand from The North Region of Cameroon Used in Construction

Journal of Sustainable Construction Materials and Technologies

article

Simon Ngoss III¹  Simon Djakba Basga²  Achille Madi Balo³  Aubin Nzeukou Nzeugang⁴  Yaceinthe Djépaze II³  Désiré Tsozué⁴  Bertin Pagna Kagonbé³ 

[1] Departments of Mines, Faculty of Mines and Petroleum Industries, University of Maroua;Institute of Agricultural Research for Development (IRAD);Local Materials Authority Promotion (MIPROMALO);Department of Earth Science, Faculty of Science, University of Maroua;Departments of Physics Science, Faculty of Science, University of Ngaoundéré

关键词: Natural Sand;    physical characterization;    fineness modulus;    North-Cameroon;   

DOI  :  10.29187/jscmt.2020.45

学科分类：社会科学、人文和艺术（综合）

来源: Yildiz Technical University

【 摘 要 】

This paper deals with the physical characterization and the optimization of fineness moduli of some natural sand samples for their appropriate valorization in construction in North Cameroon. Five sands samples (SN5, SB1, SB2, SB3 and SB4) were selected from various locations. Tests conducted include Particle size analysis, Organic impurities, Sand Equivalent and Bulk density. Fineness Modulus (FM), Mean grain, Sorting index (Si), Skewedness index and Uniformity coefficient have been deducted mathematically. Results shown that the particle size distribution curves of the studied sands have an "S" shape. The sand equivalent values vary between 91.1 and 96.8 %, characteristic of very clean sand. The fineness moduli values vary between 1.9 and 3.4 except for samples SB1 and SB2 which are coarser with values of 3.4 and 3.3 respectively. Others results shown that all the sands are pure (impurity level less than 0.5 %), well classified Sorting index Si < 0.35) and Coefficient of uniformity (Cu < 2). Studied sands are globally coarse (skewedness index between -0.35 at -0.79F). Only SB4 and SN5 satisfy the NF EN 933-1 gradation limits. Combinations of SB3 (FM = 2.1) with SB1 (FM =3.4) or SB2 (FM= 3.3) were carried out to get desired sand gradation (2.2 to 2.8), SB4 and SN5 having already good fineness moduli of 2.6 and 2.8 respectively.

【 授权许可】

CC BY-NC