Benefits of using amorphous metallic fibres in concrete slabs-on-grade

RILEM Technical Letters

article

Sunitha K Nayar¹  Ravindra Gettu¹ 

[1] Department of Civil Engineering, Indian Institute of Technology Madras

关键词: Fibre reinforced concrete (FRC);    Slabs-on-grade;    Inelastic analysis;    Flexural toughness;   

DOI  :  10.21809/rilemtechlett.2016.20

学科分类：社会科学、人文和艺术（综合）

来源: RILEM Publications SARL

【 摘 要 】

The effective utilization of pseudo-ductile materials like Fibre Reinforced Concrete (FRC) depends on the incorporation of suitable material parameters in appropriate design approaches. A design methodology has been developed for slabs-on-grade addressing various failure patterns, and giving a performance requirement as the design output. This opens up the choice of fibres, allowing the use of combinations of fibres to suit the service requirements. In this context, the current study explores the use of hybrid combinations of conventional steel fibres (SF) and a genre of corrosion-resistant amorphous metallic fibres (AMF) that have the ability to significantly enhance the flexural strength of concrete, even at relatively low dosages. It is shown that AMF, when used in combination with SF, results in a synergistic response with respect to toughness; mixes with 15 kg/m3 of SF and 20 kg/m3 of AMF exhibit about 50% higher characteristic flexural strength and more than double the characteristic equivalent flexural strength than the mix with 15 kg/m3 of SF alone, in the concrete considered here. Consequently, when FRC with a hybrid combination of fibres (AMF+SF) was considered in design, a significant reduction in thickness of slab was possible, in comparison to FRC with only SF.

【 授权许可】

CC BY