Exploitation Properties of Ni-Pd/Al2O3 Catalyst Supported on Ceramic Foam

Metallurgical & Materials Engineering

article

Vesna Nikolić¹  Kamberović²  Zoran Anđić³  Marija Korać²  Miroslav Sokić⁴  Nataša Gajić¹  Nikola Jovanović¹ 

[1] Innovation Center of the Faculty of Technology and Metallurgy, University of Belgrade;Faculty of Technology and Metallurgy, University of Belgrade;Innovation Center of the Faculty of Chemistry, University of Belgrade;Institute for Technology of Nuclear and Other Mineral Raw Materials

关键词: Nickel;    Palladium;    Catalyst;    Alumina based foam;    Dry methane reforming;   

DOI  :  10.30544/74

学科分类：医学（综合）

来源: Association of Metallurgical Engineers of Serbia

【 摘 要 】

The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on α-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors for Ni and Pd were reduced by hydrogen at low temperature of 533 K, without previous calcination. The reforming experiment was performed for 3 h, with standing time of 1 h for each of the following temperatures: 873, 973 and 1023 K. Conclusions on selectivity, catalytic activity and stability were made on the basis of CO and H2 yields.

【 授权许可】

CC BY